Meter Box Flashing Kit
Quickflash Code 100 - Meter Box Flashing Kit - Available in Galvanised Steel, Aluminium & Stainless Steel.
*Solid Plaster & Aluminium should not come in contact
- Galvanised Steel - Z450 - 0.55mm
- Aluminium - 5000 Series - 0.7mm
- Colorsteel Maxx - Thunder Grey - 0.55mm
- Stainless Steel - 304 - 0.5mm
Refer to E2/AS1 - Tables 20, 21 & 22
Code 100 - Meter Box Flashing Kit suits retangular metal meter boxes in direct fix & cavity situations that range in size up to 600mm wide by 700mm high.
The Kit consists of two top corner flashings that lap each other to accommodate the varying widths. The two side flashings slide behind the top corners & can be trimmed to length if necessary.
The bottom corners form part of the side flashings. The base flashing will need to be trimmed to length & notched out at both corners to accommodate the cladding thickness. The top 'Z' flashing, which will vary according to the cladding thickness & cavity width, is not included in the kit.
Quickflash offer a wide range of 'Z' and window head flashings. Installation instructions are included with the kit together with pop rivets and a drill bit to suit.
- quickflash_code_100c.pdf - Cavity
- quickflash_code_100b.pdf - Brick Veneer
- quickflash_code_100d.pdf - Direct Fix